Plug and Chain, Click Clack or Pop Up Waste
You’ll find three basic forms of waste kit. The regular plug and chain waste is known to every one. A retainer plug and chain waste is but one where the plug fits into the overflow grill when not being used to hold out of methods. Plug and chain wastes usually have whether ball chain or possibly a link chain. Most plug and chain wastes will fit most freestanding baths. A click clack waste is but one using a sprung plug which operates like many contemporary basin wastes, you push the plug in and it clicks shut, push it again to click it open, with click clack wastes a chrome cover fits within the overflow hole but stands slightly happy with it in an attempt to not block it. A pop up waste is but one that’s controlled by a chrome dial which fits within the overflow, a cable runs on the outside the bath in the dial towards the plug and turning the dial causes the cable to maneuver and operate the plug. Most click clack and pop up waste purchased from major chains is not going to fit most traditional freestanding roll top baths.

Concealed or Exposed Waste Kit
A low profile waste kit is but one which is assumed to become fitted in circumstances where just those parts that are fitted in the bath is going to be seen, to ensure that every one of the pipe work on the outside the bathtub – the overflow pipe, trap and outlet pipe could be plastic. An exposed waste kit ‘s all metal/chrome without any plastic parts and is also all meant to be seen. A traditional double ended freestanding bath if placed pretty much against a wall could be fitted using a concealed waste kit because the pipework is going to be hidden relating to the bath and also the wall. An individual ended traditional freestanding bath will most likely supply the pipework visible when viewed in profile wherever you install it so because of these as well as double ended baths that are from the wall you would more than likely fit an exposed waste kit using a chrome trap and outlet pipe.

Thickness of Freestanding Baths
Most traditional Freestanding Baths are much thicker than standard panel baths which may cause an issue with many waste kits. All waste kits have a parts that sit down on either side with the plug and overflow holes and fasten together to create a sandwich structure with all the wall with the bath being the sandwich filling and elements of the waste kit on either side. For plug and chain wastes the various with the waste kits generally talk with a threaded bolt as a way long because the bolts are of sufficient length (that they can usually are) then these kits will fit on any thickness of overflow or plug hole. However most click clack and pop up wastes use as opposed to a bolt a wide bore plastic threaded tube that may be only 7 to 12 mm thick, it’s not hick enough for the majority of traditional roll top baths.

Fitting a Trap with a Freestanding Bath
Freestanding baths either with or without feet frequently have reduced clearance underneath the bath along with a standard size bath trap might not exactly fit relating to the bath and also the floor. If you can to enter the bottom underneath the bath then the hole can be made within the floor for the trap to fit into, if however your floor is concrete or of for aesthetic reasons you cannot type in the floor then you’ll need to have a shallow or ultra shallow bath trap which you may have to get coming from a specialist.
For details about Freestanding Baths go our website: web link