At the receiving end and Pass Technique is by far (and that i mean by a really good way) the most effective method for developing a REAL log home.

I am if you do came by because you have began to check around for information on how better to build a log home / home. Well I am hoping the information you find on my small website answers the questions you have and when not why not ask me, I’d personally gladly answer any question it’s likely you have on developing a log home especially about the butt and pass method.

At the receiving end and Pass method is the most effective as well as the smallest amount of maintenance

Few individuals in today’s world have the necessary craftsmanship background nor the requisite amount of time it takes to get down traditional scribing and notching. Fortunately you don’t have to become master craftsman to be able to build a very high-quality log structure in relatively almost no time.

Today you can find inexpensive materials available that greatly simplify the entire process of log home building so you can placed a house with hardly any with respect to skill, time, or money. Logs are peeled, sometimes dried, cut to length, hauled in place, then drilled and pinned. Using the butt and pass log cabin, you use a huge electric drill, lots of cheap reinforcing bar (also referred to as “rebar”), and a sledge hammer to pin the logs together with essentially no scribing, no notching, with out close fitting. The last strategy is stronger plus more stable when compared to a scribed and notched log home.

A login one wall butts facing a login another wall, overlapping like brickwork up the corners. The logs are held together with rebar pins, drilled and nailed through from one log to a higher, at the corners and every two feet along each log. At the receiving end and pass method doesn’t have any vulnerable notches for rot setting in, as well as the logs are so tightly pinned together with rebar there’s no settling. From the and door frames might be nailed straight away to the logs without worry. The space involving the logs is insulated with strips of fiberglass insulation, then engrossed in sand and cement chinking mortar.

Besides being fast, durable, and economical, at the receiving end and pass method of log home building requires relatively few tools. In reality, the majority of the necessary tools would easily fit into the trunk of the car! Even though big house logs could be heavy, it is possible to lift them in place without a crane. With a block and tackle pulley system installed on a lifting pole at each corner of your home, it is easy to wrap a strap around a log and hoist it in the air, either by hand, or by attaching the haul rope into a truck. Drive backwards slowly as well as the log floats in place.

When built correctly, a butt and pass log home can outlive any other type of log house, and yes it doesn’t require endless coats of stain or any other sealants to safeguard the logs from decay.
More details about butt and pass log cabin just go to our web site: click for info