At the receiving end and Pass Technique is certainly (and i also mean by the really long distance) the most effective way for building a REAL log home.

I am if you do dropped by because you have began to check around for information about how advisable to develop a log home / home. Well I really hope the info you will find on my small website answers your questions if not have you thought to ask me, I’d personally love to answer any question you could have on building a log home specifically around the butt and pass method.

At the receiving end and Pass method is the most effective and requirements minimal maintenance

Not enough people in today’s world contain the necessary craftsmanship background nor the requisite timeframe it will take to understand traditional scribing and notching. Fortunately there is no need to become master craftsman as a way to develop a very high-quality log structure in relatively almost no time.

Today you’ll find inexpensive materials available that greatly simplify the operation of log home building to help you put up a residence with almost no in the form of skill, time, or money. Logs are peeled, sometimes dried, cut to length, hauled in place, then drilled and pinned. With all the butt and pass method, you use a huge electric drill, a lot of cheap reinforcing bar (otherwise known as “rebar”), as well as a sledge hammer to pin the logs along with essentially no scribing, no notching, with no close fitting. A final strategy is stronger plus more stable than the usual scribed and notched log home.

A sign on one wall butts up against a sign on the other wall, overlapping like brickwork the corners. The logs are held along with rebar pins, drilled and nailed through derived from one of log to a higher, on the corners every two feet along each log. At the receiving end and pass method doesn’t have any vulnerable notches for rot to create in, and all the logs are really tightly pinned along with rebar that there is no settling. The window and door frames could be nailed directly to the logs without worry. The space relating to the logs is insulated with strips of fiberglass insulation, then covered with sand and cement chinking mortar.

Besides being fast, durable, and economical, the butt and pass method of log home building requires relatively few tools. Actually, a lot of the necessary tools would fit in the trunk of your car! And even though big house logs could possibly be heavy, you can easily lift them in place without a crane. With a block and tackle pulley system placed on a lifting pole at each corner of your home, you can actually wrap a strap around a log and hoist it in the air, either yourself, or by attaching the haul rope into a truck. Drive backwards slowly and the log floats in place.

When built correctly, a butt and pass log home can outlive any other kind of log house, and yes it doesn’t require endless coats of stain or any other sealants to guard the logs from decay.
For details about butt and pass method go to our web portal: click to read more