Monthly Archives: September 2017

How To Increase your Band Score in IELTS Speaking Module

Many IELTS applicants will often be dissatisfied using performance in IELTS speaking module. There can be a number of behind this. It’s very disappointing if you should leave the IELTS interviewer’s cabin which has a long face in spite of working hard day and night to improve your grip over English language. However, it’s not necessary to take this unfortunate issue on your heart. You can actually get through your IELTS speaking test after some more effort by using following points to your considerations.

1. The best way to represent yourself:
Never forget the golden rule “First impression is the last impression”. There’s hardly anyone would you not be aware of significance of this expression. However, some enrollees often overlook this easy thought. Suppose you might be just about to get in the interviewer’s room or cabin, do not rush inside immediately. Firstly, gently knock at the door and politely seek the permission to look inside by saying, “Excuse me, sir/madam. May I can be found in? “. This is actually the most polite method of disturbing the examiner who could possibly be busy in evaluating the speaking performance from the previous candidate. Once you are granted the permission, enter in the room/cabin without having to leave the door ajar. Secondly, whenever you approach the interviewer, wish the examiner having a smile on your face. You need to stand at the front with the interviewer’s desk as an alternative to each side of him/her, and also you mustn’t sit if you aren’t required to take the seat with the examiner. Once you are motivated to sit make sure you give you a prompt reply, “Thank you sir/madam.”

Similarly, additionally, there are many other factors that you should take in your account while sitting in front of the interviewer. For instance, sitting posture, you mustn’t rest your arms on desk, because it is mainly for your examiner’s purposes. Its also wise to just be sure you are sitting together with your straight back rather than leaning contrary to the table.

The subsequent important believe could make your speaking more interactive and natural is your facial expressions. Don’t allow to drift any indication of nervousness on your face or show an absence of confidence inside you. These pessimistic expressions can have a negative impact on your interviewer, that may ultimately affect your general band score in speaking module. Instead, feel safe, positive and stay prompt inside your reply. Never show your unwillingness if you are not thoroughly gotten ready for the exam. The minute you start out showing your reluctance, the examiner will usually end up the speaking test as quickly as possible.

Body gestures is another but crucial aspect that need considering. It matters a lot and improves the way you look. While giving response to the interviewer’s questions, make use of some gestures too. The use of body language is very useful because it allows you to continue speaking especially when you obtain stuck while speaking. Furthermore, this may boost up your confidence, and at once prevent you making unnecessary pauses.

2. Sustain your Fluency and Coherency:
What exactly is fluency? You will find there’s wrong perception among test takers that fluency ways to speak very quickly. This isn’t true. You need to rather speak at the own comfortable pace, but be sure to speak neither not fast enough nor too quickly. Producing unwanted sounds, stammering or stuttering and making long pauses can hamper your fluency. Coherency is yet another yet probably the most important aspects. Which means that what you may speak should be well-connected and flow inside a natural and sensible way. Always remember that simply beating in regards to the bush will not ever get you the desirable band score in speaking.

3. Keep your Standard of English:
You have to have an impressive command of the English language. Otherwise, you should begin to make preparations just for this speaking module a minimum of several months before. If you often make grammatical errors while speaking, you must revise the primary rules of English Grammar. Avoid making errors pertaining tenses, voice, modals, and narrations. Making silly errors especially in these areas could have a negative effect on your assessor. So as to make your speaking more efficient, you can add good vocabulary words. Appropriate use of some idioms and phrasal verbs with full flexibility and precision in all of the topics can make good impression in your interviewer. However, you need to stay away from bombastic words discover fully confident about how to utilize them.

4. Pronunciation:
Pronouncing the language correctly has long been a herculean task for a lot of the non-native speakers unless they’ve got profound understanding of phonetics and semantics. Many test takers owned by non-English speaking countries often attempt to imitate like native speakers in relation to speaking English. However, some of them simply end up being a show-off within the real IELTS preparation in Karachi. Therefore, be neutral while speaking and make certain your mother tongue will not influence the way you speak English.

5. Final Points:
You might take a sigh of effective relief if the interviews finally ends up the ultimate section of the speaking module by saying, “That may be the end of one’s speaking test. Wish everyone the top on your future.” However, hearing these words, you should give you a prompt reply by saying, “Thank you a lot. I truly enjoyed Talking with you.” These words is sure to reflect that you’ve not lost your interest in your speaking test. In addition, you must not express your band requirement for the examiner or start narrating the problems you encountered in the test. Remember that the interviewer has not prepared one last evaluation report as yet. So, once the test is finished, the thing left to do is always to leave the space within a quiet and relaxed way.
More information about IELTS institute in Karachi just go to our new webpage

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Which has a strong family belief in Lord Ganesha, this year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to generate a six foot Ganesha idol with automobile scraps.


An expert in creating sculptors away from metal scrap, whenever a client approached Nishant to generate one of Lord Ganesha, he couldn’t resist. He believes his baby baby girl is an reply to his prayers to Ganpati/ Ganesha, he believed this came just as one possibility to express his love towards the higher power.

Click the youtube url for the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Inspite of the short notice, a job that will require dedication of nearly 60 – 70 days, he completed this magnificent piece in just a month. Tirelessly working day and night along with his team, according to him “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts had to be handpicked in order that they could easily fit into being a jigsaw puzzle. The most difficult and challenging part was the operation of hammering and bending the various components to get the desire model of your body. Sourcing flat parts from various vendors combined with the challenge of executing the job at the deadline, which however we was able to accomplish.

A 6 feet in height “The Lord Ganesha” sculpture, it can be made purely from various automobile scrap parts. These parts are nearly 10-15 mm thick which were bent & welded together and meticulously shaped to make it an entire metal sculpture. This Ganpati Idol has been made from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts just to name just a few. The Mooshak (Mouse/ Undir Mama) is additionally made out of gears, nuts, bolts and also using a piston block along with a wrought iron tail.
With the 6 foot Ganpati created out of automobile scrap for his client, the following work for Nishant can be a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

With a strong family belief in Lord Ganesha, this coming year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to produce a six foot Ganesha idol with automobile scraps.


An expert in creating sculptors beyond metal scrap, whenever a client approached Nishant to generate among Lord Ganesha, he couldn’t resist. He believes his new born daughter can be an answer to his prayers to Ganpati/ Ganesha, he believed this came being an chance to express his passion towards the higher power.

Click the youtube url for that scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Inspite of the short notice, a task that needs dedication of nearly 60 – 70 days, he completed this magnificent piece within a month. Tirelessly morning and night along with his team, he says “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts needed to be handpicked in order that they could fit in just like a jigsaw puzzle. The most challenging and challenging part was the whole process of hammering and bending several to obtain the desire shape of the body. Sourcing flat parts from various vendors put into task of executing the task at the deadline, which however we managed to accomplish.

A 6 ft . tall “The Lord Ganesha” sculpture, it is made purely from various automobile scrap parts. These parts are nearly 10-15 mm thick which were bent & welded together and meticulously shaped to make it a total metal sculpture. This Ganpati Idol has been given from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts only to name a few. The Mooshak (Mouse/ Undir Mama) can be created from gears, nuts, bolts plus with a piston block and a wrought iron tail.
Using the 6 foot Ganpati created away from automobile scrap for his client, another project for Nishant can be a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Which has a strong family belief in Lord Ganesha, this year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to make a six foot Ganesha idol with automobile scraps.


An experienced professional in creating sculptors beyond metal scrap, each time a client approached Nishant to produce among Lord Ganesha, he couldn’t resist. He believes his baby daughter is an response to his prayers to Ganpati/ Ganesha, he believed this came as a possible opportunity to express the romance towards the higher power.

Go through the youtube url for your scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Regardless of the short notice, a job that needs dedication of nearly 60 – 70 days, he completed this magnificent piece in just a month. Tirelessly day time and night with his team, according to him “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts would have to be handpicked so they could easily fit in as being a jigsaw puzzle. The most difficult and challenging part was the process of hammering and bending the parts to own desire model of the body. Sourcing flat parts from various vendors put into the process of executing the work on the deadline, which however we was able to accomplish.

A 6 feet tall “The Lord Ganesha” sculpture, it really is made purely from various automobile scrap parts. These parts are nearly Ten to fifteen mm thick that have been bent & welded together and meticulously shaped to really make it a total metal sculpture. This Ganpati Idol has been created from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts simply to mention a few. The Mooshak (Mouse/ Undir Mama) is also made out of gears, nuts, bolts and in addition having a piston block as well as a wrought iron tail.
Together with the 6 foot Ganpati created away from automobile scrap for his client, the next work for Nishant is a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Which has a strong family belief in Lord Ganesha, this coming year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to generate a six foot Ganesha idol with automobile scraps.


An expert in creating sculptors out of metal scrap, when a client approached Nishant to produce certainly one of Lord Ganesha, he couldn’t resist. He believes his newborn daughter is an reply to his prayers to Ganpati/ Ganesha, he believed this came just as one chance to express his passion on the higher power.

Click the youtube url to the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Despite the short notice, an undertaking that will need a dedication of nearly 60 – 70 days, he completed this magnificent piece within a month. Tirelessly time of day and night together with his team, he states “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts had to be handpicked in order that they could easily fit in just like a jigsaw puzzle. The hardest and challenging part was the process of hammering and bending the parts to obtain the desire type of our bodies. Sourcing flat parts from various vendors added to the process of executing the project at the deadline, which however we managed to accomplish.

A 6 ft . tall “The Lord Ganesha” sculpture, it really is made purely from various automobile scrap parts. These parts are nearly Ten to fifteen mm thick that had been bent & welded together and meticulously shaped to restore an entire metal sculpture. This Ganpati Idol has been created from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts in order to mention a few. The Mooshak (Mouse/ Undir Mama) is additionally made out of gears, nuts, bolts plus having a piston block along with a wrought iron tail.
Together with the 6 foot Ganpati created out of automobile scrap for his client, the following work for Nishant can be a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

Which has a strong family belief in Lord Ganesha, in 2010 ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to produce a six foot Ganesha idol with automobile scraps.


A professional in creating sculptors away from metal scrap, every time a client approached Nishant to create one among Lord Ganesha, he couldn’t resist. He believes his baby baby girl is an answer to his prayers to Ganpati/ Ganesha, he believed this came as a possible opportunity to express his love for the higher power.

Select the youtube url for your scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Despite the short notice, a task that will need a commitment of nearly 60 – 70 days, he completed this magnificent piece in just a month. Tirelessly morning and night with his team, he says “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts had to be handpicked so they really could easily fit into like a jigsaw puzzle. The most challenging and challenging part was the whole process of hammering and bending several to get the desire shape of your body. Sourcing flat parts from various vendors combined with the task of executing the task on the deadline, which however we was able to accomplish.

A 6 ft . tall “The Lord Ganesha” sculpture, it’s made purely from various automobile scrap parts. These parts are almost 10-15 mm in thickness which are bent & welded together and meticulously shaped to make it a complete metal sculpture. This Ganpati Idol has been manufactured from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts only to name a few. The Mooshak (Mouse/ Undir Mama) can also be made from gears, nuts, bolts and also with a piston block and a wrought iron tail.
Using the 6 foot Ganpati created away from automobile scrap for his client, the next work for Nishant is often a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a Masterpiece Scrap Metal Ganesha Idol!

Using a strong family belief in Lord Ganesha, this year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to create a six foot Ganesha idol with automobile scraps.


An expert in creating sculptors from metal scrap, each time a client approached Nishant to generate one of Lord Ganesha, he couldn’t resist. He believes his newborn daughter is definitely an answer to his prayers to Ganpati/ Ganesha, he believed this came as an opportunity to express the love for the higher power.

Click the youtube url to the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

In spite of the short notice, an undertaking that needs dedication of nearly 60 – 70 days, he completed this magnificent piece inside a month. Tirelessly time of day and night regarding his team, he says “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts needed to be handpicked in order that they could fit into being a jigsaw puzzle. The most challenging and challenging part was the entire process of hammering and bending several to own desire form of your body. Sourcing flat parts from various vendors combined with the process of executing the work in the deadline, which however we managed to accomplish.

A 6 feet tall “The Lord Ganesha” sculpture, it’s made purely from various automobile scrap parts. These parts are almost 10-15 mm thick that have been bent & welded together and meticulously shaped to make it an entire metal sculpture. This Ganpati Idol has been made from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts just to name just a few. The Mooshak (Mouse/ Undir Mama) is additionally created from gears, nuts, bolts as well as having a piston block as well as a wrought iron tail.
With the 6 foot Ganpati created out of automobile scrap for his client, the subsequent project for Nishant is a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

Having a strong family belief in Lord Ganesha, in 2010 ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to make a six foot Ganesha idol with automobile scraps.


An experienced professional in creating sculptors beyond metal scrap, when a client approached Nishant to make certainly one of Lord Ganesha, he couldn’t resist. He believes his newborn little girl is an solution to his prayers to Ganpati/ Ganesha, he believed this came as a possible chance to express the love on the higher power.

Click the youtube url to the scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Despite the short notice, a project that requires a dedication of nearly 60 – 70 days, he completed this magnificent piece in just a month. Tirelessly time of day and night along with his team, he admits that “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts had to be handpicked so they really could easily fit into being a jigsaw puzzle. The most difficult and challenging part was the whole process of hammering and bending several to own desire model of our bodies. Sourcing flat parts from various vendors combined with task of executing the work with the deadline, which however we been able to accomplish.

A 6 feet tall “The Lord Ganesha” sculpture, it can be made purely from various automobile scrap parts. These parts are nearly 10-15 mm thick which are bent & welded together and meticulously shaped to make it an entire metal sculpture. This Ganpati Idol has been made from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts only to name just a few. The Mooshak (Mouse/ Undir Mama) can be produced from gears, nuts, bolts and also with a piston block and a wrought iron tail.
With all the 6 foot Ganpati created from automobile scrap for his client, the subsequent task for Nishant is often a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

Having a strong family belief in Lord Ganesha, this year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to make a six foot Ganesha idol with automobile scraps.


A specialist in creating sculptors away from metal scrap, each time a client approached Nishant to produce one of Lord Ganesha, he couldn’t resist. He believes his newborn daughter can be an answer to his prayers to Ganpati/ Ganesha, he believed this came as a possible possibility to express the love towards the higher power.

Click on the youtube url for your scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

In spite of the short notice, an undertaking that requires a commitment of nearly 60 – 70 days, he completed this magnificent piece inside a month. Tirelessly working day and night with his team, he states “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts must be handpicked so that they could fit into being a jigsaw puzzle. The hardest and challenging part was the operation of hammering and bending the various components to give the desire model of your body. Sourcing flat parts from various vendors added to the challenge of executing the work on the deadline, which however we was able to accomplish.

A 6 ft . tall “The Lord Ganesha” sculpture, it is made purely from various automobile scrap parts. These parts are almost 10-15 mm in thickness that have been bent & welded together and meticulously shaped to restore an entire metal sculpture. This Ganpati Idol has been made from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts simply to name a few. The Mooshak (Mouse/ Undir Mama) can also be created from gears, nuts, bolts as well as which has a piston block and a wrought iron tail.
With the 6 foot Ganpati created away from automobile scrap for his client, the next problem for Nishant is really a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/

Nishant Sudhakaran From India Sculpts a work of art Scrap Metal Ganesha Idol!

Having a strong family belief in Lord Ganesha, this year ace sculptor Nishant Sudhakaran (Founder at Leo Enterprises) has surpassed all imaginative goals to generate a six foot Ganesha idol with automobile scraps.


An expert in creating sculptors away from metal scrap, when a client approached Nishant to generate among Lord Ganesha, he couldn’t resist. He believes his newborn little girl is definitely an answer to his prayers to Ganpati/ Ganesha, he believed this came being an possiblity to express the love towards higher power.

Select the youtube url for your scrap metal Ganesha video:

https://youtu.be/cHRFZkrsP0o

Despite the short notice, a project that will require dedication of nearly 60 – 70 days, he completed this magnificent piece in just a month. Tirelessly working day and night with his team, according to him “Ganpati Bappa removes all obstacles.”
The thick sized, heavy automobile parts would have to be handpicked so that they could fit in like a jigsaw puzzle. The most challenging and challenging part was the entire process of hammering and bending the various to own desire form of the body. Sourcing flat parts from various vendors added to task of executing the task on the deadline, which however we been able to accomplish.

A 6 feet in height “The Lord Ganesha” sculpture, it’s made purely from various automobile scrap parts. These parts are nearly Ten to fifteen mm thick which are bent & welded together and meticulously shaped making it a complete metal sculpture. This Ganpati Idol has been made from over 850 KGs of automobile car parts like disk brakes, fenders, clutch plates, flat gears, shaft gears, spark plugs, connecting rods, automobile chains, crank shafts only to mention a few. The Mooshak (Mouse/ Undir Mama) can be produced from gears, nuts, bolts and also using a piston block as well as a wrought iron tail.
Using the 6 foot Ganpati created beyond automobile scrap for his client, the following task for Nishant is really a ten to eleven foot kinetic wind sculpture.

Contact Detail-
Nishant Sudhakaran
+91 80970 27788 / +91 9920624321
[email protected]
Social media – https://www.facebook.com/leo.metals937
Youtube video: https://youtu.be/cHRFZkrsP0o
Website: https://www.indiamart.com/leoenterprises-mumbai/